21

2020

-

05

Tips for Maintaining Aluminum Profile Arc Bending


Aluminum profile bending has the characteristics of high strength, light weight, strong corrosion resistance, novel structure, convenient installation, material saving, and durability.

Aluminum profile bending has the characteristics of high strength, light weight, strong corrosion resistance, novel structure, convenient installation, material saving, and durability. However, we still carry out some simple maintenance and upkeep in daily use. Unreasonable maintenance, installation, and protection can also affect the beautiful appearance and color of aluminum profile bends. Therefore, there should be accurate maintenance and protection methods.
1. During the transfer process of factory shipment, it is necessary to handle it with care and use protective packaging to avoid loosening the bulk truck. Be careful not to collide and damage the appearance. Aluminum profile curved frame products should be wrapped with protective film, which can be packaged with three layers of protective packaging: bubble film, pearl cotton, and kraft paper to avoid collision and damage during transportation.
2. The storage environment for aluminum profile bending should be dry, bright, well ventilated, and corrosion-free. During transportation, it is necessary to cover it with tarpaulin to prevent the invasion of rainwater and snow. When the surface of the profile is corroded and contaminated, it should be cleaned in a timely manner. A soft cloth or towel can be dipped in warm water containing lubricants or medium-sized cleaning agents to wipe it off, and then washed with clean water. It is strictly prohibited to use sandpaper, steel wire balls, or sharp objects to contact the surface of the aluminum profile, otherwise it may cause scratches on the surface of the aluminum profile.
3. When storing aluminum profile bends, they should not be placed on sharp objects or uneven ground. The bottom ground must be separated from the ground by soft fabric, wooden pads, or cardboard, and the distance between them and the ground must be greater than 10CM; It is prohibited to store together with chemical and moisture data.
4. During the installation process of aluminum profile bending, waterproof tape must be applied to the surface first. The frame material that touches the wall must ensure that the oxide film and paint film on the surface of the profile are not damaged, and qualified cement and sand should be used together; Regularly clean the surface of profiles with a clean cloth and neutral cleaning agent, treat contaminants, and maintain surface brightness.